Due to hardware incompatibility or defective device drivers installed on the desktop or laptop, issues can happen unexpectedly on Windows 10. error code 0xc00000e9 windows 10 shows that you may have a hardware or device driver compatibility issue. If you are also one of those users, who are facing this error, then you are at the right place, read this guide and follow the steps to get your problem resolved in no time.
Some other reasons due to which this error can occur are listed below:
- Damaged or unplugged hard-drive.
- Drivers installed on the computer are out-dated.
- Incomplete installation of the Window.
Methods for How to Fix Error Code 0xc00000e9 Windows 10:
Solution 1: Check the Drivers installed in the computer and update to the latest version.
Solution 2: Use Driver booster, which will automatically update the faulty drivers.
Solution 3: Check the Hard-drive.
Check the Drivers installed in the computer and update the faulty drivers
Step 1: Firstly, remove all the external devices connected to your PC (except mouse and keyboard), then Restart the system.
Step 2: Now, after restarting the computer, one by one connect all the device you disconnected and check which device(s) are causing conflict.
Step 3: If you found the incompatible device, then go to the ‘Device Manager’ via Control panel and update the faulty driver.
If the problem is still causing problems, then you can reboot your system in Safe mode to continue the error fix.
Step 4: System reboot in Safe mode
Safe mode is the state which allows you to run your computer in a basic state with a limited set of drivers, which are sufficient to run your computer.
Press the Windows key available on the keyboard and click on the power button.
Click on the restart option while holding the Shift key.
Now, you will be asked to choose an option, Select Troubleshoot > Advanced options > Start-up Settings > Restart.
After your PC restarts, you will be asked to choose some options. Press F4 and F5 and continue.
If error code 0xc00000e9 doesn’t cause any problem in safe mode, then you can exit the safe mode and connect all the external devices.
If the problem still occurs, then you are suggested to restart the computer in normal mode and follow Solution 2.
Use Driver booster and automatically update the faulty drivers
Step 1: Download and properly install the Driver booster in your PC.
Step 2: After the complete installation, Run Diver Booster on your computer.
Step 3: Now, choose the scan the computer.
Step 4: you will see a list of all the faulty drivers installed on the computer. Click on the ‘Update now’ option.
If this method doesn’t resolve your problem, then you should check the Hard-disk installed on your PC.
Check the Hard-drive of the computer
Step 1: Firstly, check the Hard-disk connection and make sure there are no dust particles between the links. If this is not the problem, then go with the further steps.
Step 2: Press the ‘Windows key’ and type ’cmd’ in the search bar and press Enter.
Step 3: Type “chkdsk c” and press Enter.
Step 4: Type “/f / r / x” after that and click Enter. This command will fix the issues with the Hard-disk.
We hope, the solutions given in the guide has resolved your how to fix error code 0xc00000e9 windows 10 problem. But sometimes, while implementing the steps, you might face some problems. In such situations, contacts the customer support and get experts assistance to get rid of the problem(s).