Untangle Your Tangled Tech Issues (Instant Help)

call-icon+1-844-589-4843 (Call Now)

 

Do you require booting your system with Windows 10? Looking for an easy way to create windows 10 bootable USB? If yes; then you can use our free guide to create bootable USB and boot your Computer or PC for the proper functioning of applications.

Before going through the process of creating a bootable USB, let’s have a look at the conditions when we require booting our device.

Why do we need to Boot our Computer?

We require booting the PC if it stops working or doesn’t perform any task typically due to the virus, defective hard drive, or any other technical issue. Booting the Computer through USB device is highly recommended as it diagnoses and repairs the Computer for proper functioning.

Booting your PC is also required if you want to get the upgraded version of OS.

You need to boot your newly purchased PC to load Microsoft Windows. This process helps the operating system to interact with system hardware for the proper functioning of the Computer.

What is the USB Boot?

Basically, USB boot is a process where USB storage devices are used to boot up the system. Initially, disc, CD- or DVD-ROM was dominantly used to load the operating system, but now because of technological advancement, whenever you buy a PC or laptop, the operating system is either preinstalled. However, if any user requires external installation medium; they can use a bootable USB drive.

This time, we have got so many requests for an easy guide to create Windows 10 bootable USB, so we have brought for very easy and quick steps for how to make Windows 10 bootable USB in less than no time.

How to Make Windows 10 Bootable USB?

Step 1: Insert a USB drive into your PC

Insert a USB drive into your PC

Step 2: Press Window+R to open Run Window

Run Window

Step 3: A small window will open in the lower left corner of your screen.

Step 4: Type “diskpart”

Type Diskpart

Step 5: A new command line window will open in front of you.

Step 6: Type “list disk” and click “Enter’.

Type list disk

Step 7: You will see a list disk command that shows all the disks on the Computer.

Step 8: Then, type “Select disk” and click “Enter.”

Select Disk

Step 9: Again type “Clean” and Click “Enter.”

Clean Diskpart

Step 10: Type “create partition primary,” and then click “Enter.”

create partition primary

Step 11: Type “select partition 1”, and then click “Enter”.

select partition 1

Step 12: Further, type format fs=ntfs quick, and then click “Enter.”

Step 13: Type “active” and then click “Enter.”

Type active

Step 14: Type “exit” and then click “Enter.”

Step 15: You have successfully created a bootable drive for Windows 10.

How to Boot Windows 10 from USB?

After creating the Windows 10 bootable USB, let’s go through the steps to boot your system with the help of USB drive.

Step 1: Connect the USB drive.

Insert a USB drive into your PC

Step 2: Go to the Windows icon located at the lower left corner of your computer screen.

Step 3: Click on the Windows icon and go to settings.

Step 4: Click on the Settings gear icon

Step 5: Select Update & security

Update and Security

Step 6: Go to “Recovery”

Step 7: Under “Advanced startup,” click on “Restart.”

Go To Recovery and Restart

Step 8: Once your PC restarts to the Choose an option screen,

Step 9: Click on the “Use a device” option.

Choose Option and Use a Device

Step 10: Click on the USB drive

Use a Device

Step 11: Your system will start the booting process from the bootable USB.

Hope, after reading the above-mentioned guide, you know how to make Windows 10 bootable USB. In case, you require assistance from experts, then call on Windows 10 customer service number +1-844-589-4843 for prompt assistance.