Do you use a HP printer? If yes; then in some cases you might need to change or replace the HP Printer ink cartridges. Some situations, when you would need to replace the ink cartridge:
Due to incompatible ink cartridge installed in the Printer.
When ink cartridge causes any problem.
Due to an empty ink cartridge.
For all these situations, you would need to install a new ink cartridges. If you are facing any of the issues mentioned above, then read this whole guide and follow all the steps carefully to resolve your problem in no time.
Steps for How to Insert HP Printer Ink Cartridges:
Step 1: Open the Printer’s top cover, before that make sure the Printer is switched on.
Step 2: When the carriage moves to the right side, slide the ink cartridge into the carriage. Make sure that the carriage is silent or idle while doing so.
Step 3: If the tri-color ink cartridge is to be replaced, remove the ink cartridge from the left slot.
Step 4: But, if you want to replace the black ink cartridge, then take it out from the right slot.
Step 5: Now, Unpack the new ink cartridge if you have bought a new one.
Step 6: Place the new ink cartridge in the slot, but make sure to remove the protective tape by plucking the pink tab of the cartridge.
Step 7: Avoid touching ink nozzles and copper contacts as it can trigger ink failure and clogging.
Step 8: Now, Insert the fresh ink cartridge in the carriage, while checking that the copper sheets are facing the Printer and are at the bottom.
Step 9: As you have read above, Insert the tri-color cartridge in the left slot, and black on from the right slot.
Step 10: Now, you can close the top cover of the Printer because the installation of the new HP Printer ink cartridges is successful.
Hope you got some satisfactory information from this guide, and in future, if you would need how to insert HP Printer ink cartridges, you would be able to do it. Yes, if in case you get into any problem on how to put ink cartridges in HP printer, you can contact customer support.