Are you struggling with HP printer carriage jam error? Unable to fix it? Don’t freak out! We have come up with few yet effective solutions to get rid of HP printer carriage jam error.
If you are using the HP printer and need help to fix carriage jam error; then you can implement any of the solutions mentioned below. Anyone can encounter this kind of error, as it is prevalent. Usually, the main causes behind such errors are previous printing errors like paper jams, stuck foreign objects, and other advanced issues that persists inside the Printer.
So, in order to fix this irritating printer issue, one can make use of the comprehensive guide mentioned below.
Solution for How to fix HP printer carriage jam error?
Solution 1 – Restart your Printer
Power off the Printer and leave it for 1-2 minutes. Again turn it on and wait for while till the time the restarting process is completed. Ensure if the issue is resolved by initiating test print. In case the issue still persists, you can try implementing other solutions mentioned below.
Solution 2 – Remove the jammed paper from the Printer
Step 1: Turn off the Printer by pressing the power button
Step 2: Further, remove all papers on the paper tray.
Step 3: Again, turn on the Printer.
Step 4: Further, plug out the power cord.
Step 5: Then, open the access cover to the paper rollers and bring out the jammed papers. You must ensure that all the papers have been removed and no pieces are left on the paper rollers.
Step 6: Again insert the power cord plug.
Step 7: Further, turn on the Printer.
Step 8: Run a test print to ensure the error is resolved.
Solution 3 – Reinstall the ink cartridges
Step 1: Remove the power cord without turning off the Printer.
Step 2: Further, open cartridge carriage.
Step 3: Then, ensure if there is paper jams or foreign objects.
Step 4: Further, remove the ink carriage and reinstall it again. Please make sure if the ink carriage is moving without any obstructions.
Step 5: Plug the power cord back in.
Step 6: Ensure if the issue is resolved by initiating test print.
Solution 4 – Reset the Printer to factory settings.
Step 1: Unplug the power cord from the board without turning off the Printer through the power button.
Step 2: Remove the USB cable, if present. Further, wait for 2-3 minutes.
Step 3: Again plug in the power cord.
Step 4: Press and hold the Power button on your HP printer.
Step 5: You will see the attention light turned on.
Step 6: Now leave the Power button.
Step 7: You will see the attention and ready lights cycling. This signifies that the Printer is restoring to the factory settings.
Hope you find the solutions mentioned above helpful and you were able to fix HP Printer carriage jam error. In case, you require expert assistance; then you can contact the HP support directly through chat, email, and call.